The date of payment from buyers deliver within days
-Print on PP/PET/PS/PLA cup & bowl
-Max.printing speed: 300 pcs/min
-Qty of Colorhead: 4-8 units for PP/PET/PS/PLA cup and bowl offset printer
-Cup height: 30~235mm
-Printing height: 160mm
-Rim diameter: 180mm
-Printing diameter: 168mm
-Max.taper: 15 degree
-Printing mode: 6 or 3 blanket mode, switchable.
-Stable base and blanket roller for PP/PET/PS/PLA cup and bowl offset printer. More than 1 ton for each;
-Well build colorhead based on 30 years of manufacturing experience;
-8 rollers in one colorhead to ensure the ink distribution;
-4 screw separator with no gap make stable cup feeding;
-Easy switch between 3 and 6 blanket mode;
-Mandrel rotation for corona treatment and UV curing are driven by servo motors;
-Pinhole detection and reject system;
-Easy printing plate mounting;
-Quick change for printing model and mandrel;
-Accurate counting and restacking;
-Ink fountains and rollers are easy detached for cleaning and replacing;
-Blanket roller of I or 2 layers of rubber blanket for your choice.
Pictures of PP/PET/PS/PLA cup and bowl offset printer:
Printing part of PP/PET/PS/PLA cup and bowl offset printer:
1.How to replace the cup model?
-Loosen the screw that stick against the mandrel in the mold base, take out the mold and mandrel, Put another set of mold with mandrel in the mold base and then fasten the screw.
2.How to change the printing plate?
-Assuming that you have already punched the hole at both ends of the printing plate. Twist the screw in the middle of the plate roller, to make 2 rows of pin loosen, hang the plate around the roller, insert the pins to the hole at both ends of the plate, twist the screw in another direction and tighten the plate on the roller. Make sure there is no gap between plate and plate roller.